Devnet

CAUTION this page is for building and running the latest development version of the chain for testing purpose only. Please note that is under active development and is highly unstable and subject to breaking changes. You should expect a moderate amount of troubleshooting work is required.

For anyone interested in joining the Cronos testnet, please refer to our public testnet documentation which will be released shortly.

By following this tutorial, you can compile and run the latest development version of Cronos testnet from scratch. It is intended for testing purpose only.

Overview

The first option is to use , a dedicated script similar to , but without the scaffolding feature to build a local development network with multiple validators. Another option is to use a shell script init.sh to build a local development network with a single validator.

Pre-requisites

Option 1. Using `pystarport`

Python > 3.7.3

To install pystarport, run:

$ git clone https://github.com/crypto-org-chain/cronos.git
$ cd cronos
$ pip3 install pystarport

Option 2. Using Shell script

Install the binded version, which install cronosd together, and find it by the absolute path:

git clone https://github.com/crypto-org-chain/cronos
cd cronos
make install

Afterward, you can verify that by

$ cronosd -h

and also you can check the version of the cronosd to see if it is built with the later commit:

$ cronosd version
[version-g<commit_hash>]

Step 1. Customize your devnet

Note: You can skip this section and start a local devnet without customization.

Option 1. Using `pystarport`

You can customize your devnet based on cronos/scripts/cronos-devnet.yaml, for example:

  cronos_777-1:                   # change the chain-id
      json-rpc:
      address: "0.0.0.0:8545"     # change the JSON-RPC address and port
      ws-address: "0.0.0.0:8546"  # change the JSON-RPC websocket address and port
      api: "eth,net,web3,debug"
.......
  accounts:
    - name: community
      coins: 10000000000000000000000basetcro
      mnemonic: ${COMMUNITY_MNEMONIC}
    - name: signer1
      coins: 20000000000000000000000basetcro
      mnemonic: ${SIGNER1_MNEMONIC}
    - name: signer2
      coins: 30000000000000000000000basetcro
      mnemonic: ${SIGNER2_MNEMONIC}

The default configuration will give us two devnet validators with the chain-id cronos_777-1; three accounts community, signer1 and signer2 with some allocated funds at the genesis.

Option 2. Using Shell script

### customize the name of your key, the chain-id and moniker of the node ###
  KEY="mykey"
  CHAINID="cronos_777-1"
  MONIKER="localtestnet"
.......
### specify the default keyring back-backend to be 'test' for convenience ###
  cronosd config keyring-backend test
  cronosd config chain-id $CHAINID
.......
# Allocate genesis accounts (cosmos formatted addresses)
  cronosd add-genesis-account $KEY 100000000000000000000000000aphoton --keyring-backend test
# Sign genesis transaction
  cronosd gentx $KEY 1000000000000000000000aphoton --keyring-backend test --chain-id $CHAINID

The default configuration will give us a single validator devnet with the chain-id cronos_777-1; one account under the name of mykey with some allocated funds at the genesis.

Step 2. Start the devnet

Once we finish with the configuration, we are ready to start the chain: in the repository root directory, run

Option 1. Using `pystarport`

$ pystarport serve --config ./scripts/cronos-devnet.yaml

Afterwards, keys will be generated according to the configuration specified, the accounts' information is generated in data/cronos_777-1/accounts.json, for example:

[
  {"name": "validator", "type": "local", "address": "crc12luku6uxehhak02py4rcz65zu0swh7wjsrw0pp", "pubkey": "{\"@type\":\"/ethermint.crypto.v1.ethsecp256k1.PubKey\",\"key\":\"Am5xCmKjQt4O1NfEUy3Ly7r78ZZS7WeyN++rcOiyB++s\"}"}, 
  {"name": "validator", "type": "local", "address": "crc18z6q38mhvtsvyr5mak8fj8s8g4gw7kjjtsgrn7", "pubkey": "{\"@type\":\"/ethermint.crypto.v1.ethsecp256k1.PubKey\",\"key\":\"AkJ4WnUHRFLWKmrCInD/uPsByTddC6coh66ADcYZMV0b\"}"}, 
  {"name": "community", "type": "local", "address": "crc1czp5lh3ke85rruvg0vawec02perp2ul678x46r", "pubkey": "{\"@type\":\"/ethermint.crypto.v1.ethsecp256k1.PubKey\",\"key\":\"ApQozcgkbLxyWF5VYXBG7EY+R9p0IcyqngqaOz7FPJib\"}", "mnemonic": "figure outdoor option kitten force avocado hair rug shoulder win engage coconut record lounge insane royal crime powder dwarf monster car thing bench bamboo"}, 
  {"name": "signer1", "type": "local", "address": "crc1gt7cfua508jfexuf9ea4536sdqkv62dsxxalc2", "pubkey": "{\"@type\":\"/ethermint.crypto.v1.ethsecp256k1.PubKey\",\"key\":\"A/93qfsXgEexTmtrkcq+LtFfclUU3FjyJuOVeCR+qi/1\"}", "mnemonic": "pencil shrug wire extra bonus deny ride trap science clarify lonely profit rural quote hamster fuel pig speak total lumber bench canyon possible execute"}, 
  {"name": "signer2", "type": "local", "address": "crc1drs00mg2wfn26vtgsfqreq0m3jcfqf564gwkkk", "pubkey": "{\"@type\":\"/ethermint.crypto.v1.ethsecp256k1.PubKey\",\"key\":\"AkcixU8yAi547Oe9lUUMaQU4baQGCZU5ju2YeIZdaSOD\"}", "mnemonic": "cruel install century disease tired glass lesson mushroom donor usual uncover fly post stamp busy utility certain obscure whisper scene order want sentence reduce"}
]

Kindly save these mnemonics for key recovery later.

It is worth mentioning that the serve command would truncate all the blocks previously generated and regenerate a new genesis block, which means you'll also lose all of your transaction records. If you wish to restart the chain with the existing blocks, please run pystarport with start command:

$ pystarport start --config ./scripts/cronos-devnet.yaml

Step 3. Interact with the chain

After the chain has been started, we may open up another terminal and start interacting with the chain by cronosd.

Keys management

Restore the key

For Pystarport:

As in the last section, pre-created Hierarchical Deterministic (HD) mnemonic with genesis funds inside are prepared for you in the Devnet. To gain access to the funds, kindly restore the key by using the mnemonic before moving on to the next step.

Firstly, restore the key name as signer2:

$ cronosd keys add signer2 --recover --keyring-backend test

Fill in your bip39 mnemonic, as can be found in data/cronos_777-1/accounts.json. Note that these addresses and mnemonic phrases are different for everyone.

Enter your bip39 mnemonic
cruel install century disease tired glass lesson mushroom donor usual uncover fly post stamp busy utility certain obscure whisper scene order want sentence reduce
- name: signer2
  type: local
  address: crc1drs00mg2wfn26vtgsfqreq0m3jcfqf564gwkkk
  pubkey: '{"@type":"/ethermint.crypto.v1alpha1.ethsecp256k1.PubKey","key":"A9J4ELPAqyyrmypT9CtOVyWrO66eEXum3d8Z2mV7MS6O"}'
  mnemonic: ""

Check account balance

You can, for example, check the account balance by

cronosd q bank balances crc1drs00mg2wfn26vtgsfqreq0m3jcfqf564gwkkk -o json | jq

For example:

{
  "balances": [
    {
      "denom": "basetcro",
      "amount": "30000000000000000000000"
    }
  ],
  "pagination": {
    "next_key": null,
    "total": "0"
  }
}

We can see that there is 30000000000000000000000 basetcro in this address.

Transfer token to another address

We are now ready to transfer token between different addresses; we can create another address with the key name Bob:
```
$ cronosd keys add Bob --keyring-backend test
```
which gives, for example:

 - name: Bob
 type: local
 address: crc1vqgk86fzr64xsyeemlxnxxeawcw0zfcx3dwgjt
 pubkey: '{"@type":"/ethermint.crypto.v1.ethsecp256k1.PubKey","key":"AsR5N3GJpk6TiN4EDYv7SsW/eKPvaLBkiEh/FFwcNvUoG"}'
 mnemonic: ""
 threshold: 0
 pubkeys: []

Now we can transfer tokens to Bob, for example you can send 1basetcro to Bob's address by

  $ cronosd tx bank send signer1 crc1vqgk86fzr64xsyeemlxnxxeawcw0zfcx3dwgjt 1basetcro --keyring-backend test --chain-id cronos_777-1

Lastly, check balance of Bob's address:

$ cronosd query bank balances crc1vqgk86fzr64xsyeemlxnxxeawcw0zfcx3dwgjt

and we can see that 1 basetcro has already been transferred:

balances:
- amount: "1"
denom: basetcro
pagination:
next_key: null
total: "0"

Congratulations! You've successfully transferred tokens to Bob.

Check the current validator set

Firstly, we can check the details of the current validator set by the query command of cronosd, for example:

$ cronosd query staking validators -o json | jq

will result in

{
  "validators": [
    {
      "operator_address": "ethvaloper1a303tt49l5uhe87yaneyggly83g7e4unxlc59p",
      "consensus_pubkey": {
        "@type": "/cosmos.crypto.ed25519.PubKey",
        "key": "T3srVdJb8CXku5GobwHHt37t2iGQ+mRL/bEHK8Zlusw="
      },
      "jailed": false,
      "status": "BOND_STATUS_BONDED",
      "tokens": "1000000000000000000000",
      "delegator_shares": "1000000000000000000000.000000000000000000",
      "description": {
        "moniker": "localtestnet",
        "identity": "",
        "website": "",
        "security_contact": "",
        "details": ""
      },
      "unbonding_height": "0",
      "unbonding_time": "1970-01-01T00:00:00Z",
      "commission": {
        "commission_rates": {
          "rate": "0.100000000000000000",
          "max_rate": "0.200000000000000000",
          "max_change_rate": "0.010000000000000000"
        },
        "update_time": "2021-07-06T16:15:07.061973Z"
      },
      "min_self_delegation": "1"
    }
  ],
  "pagination": {
    "next_key": null,
    "total": "0"
  }
}

then we can see that there are two active validator localtestnet at the moment.

For the validator, we can see that it comes with an address and a public key:

"operator_address" - The operator address, which is used for identifying the operators of validators;
"consensus_pubkey" - The consensus public key, which is used for identifying the validator nodes participating in consensus.

PreviousCronos Testnet NextBest Practices

Last updated 5 months ago

Was this helpful?

Overview

Pre-requisites

Option 1. Using pystarport

Option 2. Using Shell script

Step 1. Customize your devnet

Option 1. Using pystarport

Option 2. Using Shell script

Step 2. Start the devnet

Option 1. Using pystarport

Step 3. Interact with the chain

Keys management

Restore the key

Check account balance

Transfer token to another address

Check the current validator set

Overview

Pre-requisites

Option 1. Using pystarport

Option 2. Using Shell script

Step 1. Customize your devnet

Option 1. Using pystarport

Option 2. Using Shell script

Step 2. Start the devnet

Option 1. Using pystarport

Step 3. Interact with the chain

Keys management

Restore the key

Check account balance

Transfer token to another address

Check the current validator set

Option 1. Using `pystarport`

Option 1. Using `pystarport`

Option 1. Using `pystarport`

Option 1. Using `pystarport`

Option 1. Using `pystarport`

Option 1. Using `pystarport`